Fifth Edition, September Sixth Edition, February Design, Installation, Operation, Test Norsok standards are developed by the Norwegian petroleum industry.
They are owned by M on piping and equipment insulation 45 The NORSOK standards are developed by experts from the Norwegian petroleum industry and approved according to the consensus principles as laid down by the guidelines given in. Total IFkan no: This standard is for example used on all newer Danish and German power stations and many power stations in the rest of the world.
This standard is used by the offshore oil industry. The hierarchical structure of the various standards is shown below: Fig. These are ideal conditions for a long-term, leakage free use in the oil and gas industry. M Stainless Steel Good to Excellent. Pressure capabilities are normally around 20, psi with a tem.
Norsok M, rev. Muki Z Sweep blast : Barrier. Jotamastic 90 WG : Hardtop Pro. This JIP33 standardized procurement specification follows a common document structure comprising the four documents as shown below, which together with the purchase order define the overall technical specification. Name of Standard. Category of Standard. Foreword The NORSOK standards are developed by the Norwegian petroleum industry to ensure adequate safety, value adding and cost effectiveness for petroleum industry developments and operations.
Furthermore, NORSOK standards are, as far as possible, intended to replace oil company specifications and serve as references in the authorities regulations. The NORSOK standards are normally based on recognised international standards, adding the provisions deemed necessary to fill the broad needs of the Norwegian petroleum industry.
Latest issue of the references shall be used unless otherwise agreed. Other recognized standards may be used provided it can be shown that they meet the requirements of the referenced standards. Order no. Heating, ventilation and air-conditioning ISO , Specification and qualification of welding procedures for metallic materials. Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys. ISO , Ships and marine technology Drainage systems on ships and marine structures Part 2: Sanitary drainage, drain piping for gravity systems.
0コメント